The vehicles we drive on a daily basis have the tendency to break down. If and when they do break down, they will often have to be repaired.
The clearance i.e. the distance between the bottom of these vehicles and the ground levels inevitably have to be increased. The levelers come in handy at such times.
|1||Rough Country 1307 2" Leveling Kit...||$49.95||Buy on Amazon|
|2||MotoFab Lifts CH-3F-2R 3 in Front...||$124.98||Buy on Amazon|
|3||Rough Country - 28330 - 1.5-2-inch...||$209.95||Buy on Amazon|
|4||MotoFab Lifts CH-2LM - 2 in Front...||$34.90||Buy on Amazon|
|5||MotoFab Lifts CH-2.5-2.5 in Front...||$61.90||Buy on Amazon|
BEST LEVELING KITS FOR SILVERADO
#1: MotoFab Lifts CH-3F-2R 3″
These lifts are comprehensive in the sense that they can fit many spaces and handle quite a number of vehicles. You have them for your consideration if you have many different kinds of vehicles to take care of at any given time.
Its front spacers are CNC-machined. With regards to this, they are very precise and reliable. Moreover, they are also derived from the billet Aluminum material which is light yet tough. You will, therefore, encounter almost no hassles to engage them in the course of working your vehicles.
Powder-coated Rear Lift Blocks
The rear lift blocks are powder-coated. This coating is intended to shield the exterior from direct contact with the harsh external weather elements. It, therefore, contributes to the increased lifespan of the levelers altogether.
Fabricated Lift Blocks
Other than being powder-coated, the rear lift blocks are also fabricated to add their strength and overall durability. By reason of this fabrication, they are well able to outlast the cast iron and solid aluminum rear lift blocks counterparts. This is not to mention that they also call for limited repairs and maintenance.
- Takes a shorter duration of time to install
- Does not require strut or coil disassembly as other kits
- Backed by a comprehensive lifetime warranty
- By far the strongest kit on the market
- Comes with a 100% satisfaction guarantee
- Weighs a whopping 21.6 pounds
- Quite clumsy and relatively inconvenient to handle
- Imposes way too much clutter
#2: MotoFab Lifts CH-2.5-2.5″ Front Leveling Lift Kit
Perhaps no other leveling kit is as great for the sporting utility vehicles as these particular kits. They are very strong, quite reliable, and able to endure the most intense weights and abuse. Do consider leveraging them in case you have such kinds of cars in mind.
Billet Aluminum Construction
They are made of the extremely lightweight yet sturdy billet Aluminum materials. This construction means they are lighter to carry along and engage. You will not have to possess to huge muscle power or engage plenty of muscles to have them perform their chores.
Black Powder Coating Finish
Throughout the exterior of the levelers is some black powder coating finish. This material shield the exterior surfaces of the levelers from the various agents of deterioration like corrosion and cleavage. In light of this, the levelers stay in good working condition for a prolonged duration of time.
On the whole, the levelers can pair and work with many kinds of sporting vehicles. These include the 2007-2018 Silverado and Sierra (both the 2WD and the 4WD varieties). You, therefore, have the pleasure of being able to use them across numerous platforms and kinds of vehicles.
- Takes only 1 hour to install
- Requires not so many tools to engage at all
- Does not have to be assembled prior to use
- Attains an impressive raising height of around 2.5 inches
- Hardly sustains any cracks even when subjected to intense use with time
- Inappropriate spacer thickness to lift ratio
- Has fewer specifications
- Only limited to fewer applications
#3: Rough Country (1307) 2″ Front End Leveling Kit
The front portions of the vehicles are often daunting and challenging to handle. With regards to these, they require some extra care and attention to be able to handle effectively. Only an appropriately designed leveling kit to be able to be conclusively actualized.
Lower Strut Mount Extensions and Hardware
Forming a vital component of the leveler is a lower strut mount hardware and extensions. You will use the lower strut mounts to add some strength to the base of the levelers. This arrangement makes it possible for the levelers to become more stable and reliable.
100% Simple Bolt-on Installation
Engaging this leveler will not be so much of an uphill task to you at all. It is comparatively simpler to install by reason of being equally simpler in scope. The dual pleasures of maximum convenience and limited fatigue are therefore yours to leverage.
Generally speaking, the leveler works well with all kinds of Original Equipment Manufacturer (OEM) control arms. This universal scope and compatibility negate the threats of unnecessary hindrances which are encountered while trying to engage different kinds of equipment, tools, and machinery.
- Brings about factory-ride quality
- Leads to increased ground clearance
- Levels the front together with the rear part of the vehicle
- Does not require any disassembly of your struts to be to install
- Provides a comfortable 2-inch lift as soon as it is installed
- Needs some frequent inspections
- Inflicts higher operational costs
- Imposes some inconveniences while being used
#4: YITAMOTOR Leveling Kit 2″ Lift Kit
In case you have some limited financial resources at your disposal, you might want to give this leveler a try. It is extremely cheap, yet still capable of discharging the required tasks and outputs. It is also strong and very effective notwithstanding its relatively smaller dimensions and weights.
6061-T6 Aircraft-grade Aluminum Billet
On the whole, the entire makeup of the levelers come in the form of the 6061-T6 aircraft-grade aluminum billet material. This material is light yet strong enough. Your use of the material, therefore, guarantees you awesome reliability at all times. It also negates the need for too much muscle power.
Some 10.9-grade bolts which are pre-installed also form a vital part of this particular leveler. They are heat treated and thoroughly hardened to be as strong as can be. You may, therefore, count on the bolts not to let you down at all. They are well able to withstand the most intense of pressure.
Lastly comes the anodized surface. These surfaces are so designed and constructed as to confer added resistance to corrosion and other elements of wear and tear. You are therefore rest assured to spend the least amount of money possible to maintain the leveler in the right shape and form at all times.
- Negates the need for the vehicle rakes
- Adds to the aesthetics and appearance of the home and garage
- Offers exceptional ground clearance which allows you to fit larger wheels and tires
- Quite a strong and safer for use
- Retains the awesome factory riding quality
- Not so durable as should be the case
- Incomprehensive in scope and quality
- Offers lower value for money
#5: Supreme Suspensions -- 2007-2018 Silverado
For wider ground clearance, you badly want to make good use of some equally large and spacious levelers. You have these particular levelers for your consideration as they have consistently proved to be great and well-suited for such applications. What’s more? The levelers are also simpler to engage on the whole.
These products are rigorously tested and developed to conform to the ASE certification standards. This Automotive Service Excellence certification is a sign that the equipment is indeed of extremely high quality. Your purchase of these levelers, therefore, guarantees you some peace of mind.
Other than performing the core role of leveling the motor vehicles, this machine is also able to enhance the aesthetics of your room and garage. This stems from its aesthetic appearance that is occasioned by the Supreme Suspension’s 2-inch lift that is elegantly designed.
High-density Delrin Construction
A high-density Delrin construction closes the list of its most awesome features. This construction is extremely tough and reliable. It stays in the upright nature for an extended duration of time. Over and above this, the construction also calls for limited repairs and maintenance on your part.
- Greatly improves the appearance of your vehicle
- Allows you to fit larger and customized tires and rims
- Requires no special tools to mount and install
- Quite easy and simpler to set up
- Brings about the required outcomes after a short duration of time
- Incompatible with the “Classic Body Style” 2007 models
- Cannot handle weightier motor-vehicles
- Calls for great expertise to handle and engage
#6: Rough Country -- 28330
Are you a career mechanic? You definitely want a toolkit that is comprehensive in scope. This is to enable you to work with many kinds of vehicles and machinery well. No other set of tools will guarantee you these comprehensive applications better than the one under this consideration.
In all, the leveler comes in the form of an aggressive look and a taller stance. This aggressiveness is made possible by some torsion keys which allow for fine-tuning of the torsion bar. Its adjustable range is the comfortable 1.5-2.5 inches. It gives you the pleasure to determine the comfortable and convenient dimension to work with.
Forged Torsion Bar Adjuster Keys
These are basically keys which are used to adjust the torsion of the leveler appropriately. You may and can indeed dial these keys into the desired angle of use. These range from the perfectly level to the Cali lean. The keys yet again grant you some leeway of use and applications.
On the whole, the leveler can impact tires that measure up to 32 inches in diameter. On the same note, they can also fit up to 285/75 R16 tire sizes that are accompanied by the factory backspacing. Your purchase of this leveler also assures you some higher returns on investments.
- Mounted by an easy bolt-on installation
- Greatly increased ground clearance
- Levels the front with the rear portions of the car
- Offers plenty of strength to maintain everything locked and leveled
- Brings about longer lifespan of the vibration dampening
- Very expensive to afford
- Imposes too much clutter on the garage
- Inconvenient to handle
#7: Maxracing 2″ Front End Leveling Kit
If you are a career mechanic, you yet again have this particular leveler for your consideration. It has a pretty wide compatibility. This stems from its ability to pair and work with the Yukon XL1500, Chevrolet Avalanche, Tahoe GMC Sierra, and the Silverado Suburban 1500. The pleasure of unhindered applicability is, therefore, yours to leverage.
Faster Installation Time
You will take around 2-4 hours to mount this leveler. This faster installation time means you will not be inconvenienced as you set up the leveler. Instead, you will readily start enjoying the benefits that the wonderful piece of equipment has to offer.
Excellent Backspacing Capability
Other than taking less to set up, the leveler also possesses excellent backspacing capability. This ability makes you engage it out and about as simple as you possibly can. You will not have to put in too much of your effort to be able to enjoy the awesome benefits that the tool can possibly give off.
Wider Recommended Tire Size
Closing the list of its outstanding features and benefits is the ability to fit and work with many tire sizes. In particular, it is better for the 285/75 R17 kinds of tires. By reason of this feature, you yet again stand to gain higher returns on your money than you would naturally.
- Eliminates the need for the factory rake
- Improves your interior décor
- Brings about higher ground clearance
- Keeps your vehicle perfectly aligned and level
- Requires no disassembly during use
- Weighty and cumbersome to handle on the whole
- Potentially injurious if not handled with care
- Requires some muscle power to engage
#8: MotoFab Lifts 99CHTK 1-3″ Leveling lift kit
Do you have a Silverado or a Sierra 4WD? If you do, you may have realized that their fronts measure around 1 – 3 inches. This particular dimension is a bit unique and unlike any other. It, therefore, calls for an equally unique and specially-designed leveling kit of this kind.
Grade 50 Plate Steel
The leveler comes in the form of the torsion keys. These are subsequently made of the wonderful Grade 50 plate steel materials. The material is indeed long lasting and highly resistant to scratches and other forms of wear and tear. This is not to mention that they are also CNC-machined during construction.
Black Powder Coating
Over and above the durable 50 plate steel construction, the leveler is also entirely coated using some black powder. The coating is done in such a manner as to conform to your unique factory suspension settings. This coating goes a step further to enhance the strength of the leveler and bolster its resilience to the common agents of the tear.
Some adjustable keys also accompany this leveler. The keys basically allow you to raise the truck within the range of 1 to 3 inches in the front. This way, you get to receive the amount of clearance you are way very comfortable with. You will, therefore, say goodbye to any unnecessary hindrances while working your vehicles.
- Stronger than the forged torsion keys
- Very superior to the stock cast keys
- Installable in slightly under one hour
- Comes complete in scope and construction
- Backed by 100% satisfaction guarantee
- Accommodates only fewer attachments
- Delivers less reliable leveling outcomes
- Offers not so great support
#9: 3″ Front Leveling Lift Kits for Chevrolet Silverado
Do you have some circular machine parts to take care of? If I heard you answer in the affirmative, you have these levelers for your consideration. They are circular in shape and hence easily fits round parts. This is not to mention that they are also strong enough to bring about added strength and reliability.
Black Anodized Surface
A black anodized surface forms by far the most prominent feature of this leveler. The surface offers great resistance to corrosion by warding off the percolation of water and moisture. This, in turn, gives rise to awesome stability and maximum reliability.
Premium Material Construction
Only premium and strong materials have been used to make up the leveler. These are the forged aircraft billet aluminum T6 which is treated for added durability. You should be sure that the leveler will indeed do you some good by reducing the incidences of breakdowns and the subsequent repairs.
12.9-grade Premium Bolts
Lastly, its bolts are also made of the tough and premium materials. In particular, the bolts feature the 12.9-grade Premium material. The subsequently form tough and extremely reliable joints. As a result of this, you may be sure that the leveler shall bear the most intense of weights and fidgeting.
- Quite good looking on your truck
- Provides enough ground balance
- Installable in only 1-2 hours
- Calls for no special tools to operate
- Raises the truck at a comfortable distance of about 3 inches
- Only for circular machine parts
- Calls for plenty of muscle power to engage
- Way too bulky to carry around with ease
#10: MotoFab Lifts CH-2LM -- 2″ Front Leveling Lift Kit
Of all the levelers under consideration, none fits the pickups much better than this one. It is rectangular in shape and very strong. Because of this, the leveler is pretty reliable and provides great support indeed. It is particularly great at handling those tough pot-holes and roads.
By its sheer construction, the leveler is able to match the factory suspension settings of almost all kinds of vehicles and pickups. This arrangement means you will not have to spend too much of your money to purchase numerous tools of this kind for the purpose of tackling your pickups.
No Disassembly Necessary
You will not have to disassemble this kit when you are done with use at all. This is because the leveler comes in a compact size which is comprehensive in scope. The pleasure of maximum convenience in times of use is, therefore, yours to leverage. This is not to mention that it also takes less to install.
With this leveler, you will be able to raise a GMC truck by a whopping 2 inches high. This is high enough to give you enough room to handle all tasks well. By the reason of this clearance, you may be sure that the leveler will aid you in working out freely.
- Way too superior to the welded spacers
- Pretty strong and resilient in nature
- Easy do-it-yourself instructions and operational manual
- Does not interfere at all with the dimensions of the truck
- Accompanied by great back-end support
- Capable of inflicting some injuries
- Requires many tools to work
- Too unmalleable to be flexibly utilized
#11: MotoFab Lifts CH-1R 1″ Rear Leveling lift kit
To effectively level the rear of the Chevy Silverado Sierra GMC, you should consider taking this leveler. It is specially designed to handle these kinds of cars well. This is because the leveler is compatible with the parts and components of this particular car. It hence eliminates all forms of hassles on your part.
Fabricated Lift Blocks
Its lift blocks, which perform the acts of raising the trucks are fabricated. This is to make them stronger and more resilient to discharge their roles effectively. This fabrication enables the leveler to last longer than those that are made of the solid Aluminum materials. You will save lots of money on maintenance costs.
The outer portions of the leveler are made of long-lasting finish. This is due to the powder coating which offers adequate protection from all the various elements of wear and tear. In particular, the powder coating prevents the seeping in of water and also slows down the onset of corrosion.
On the whole, the leveler comes along with some two fabricated rear lift blocks and longer-than-usual U bolts. You will not have to purchase several cooperant tools and accessories to be able to make maximum use of the leveler. You will subsequently enjoy maximum convenience and reduced hassles as you engage the equipment.
- Takes the shortest time to install
- Available in a comprehensive package that is convenient to use
- Comes along with a Lifetime warranty
- Matches the factory suspension specifications
- Coated for added protection from external weather elements
- A narrower range of lifting
- Works well with fewer vehicles
- Produces limited clearance
WHAT IS A TRUCK LEVELING KITS?
These are lifts and leveling tools which play the role of raising the body of the vehicles away from the axles.
They enable the vehicles to fit larger tires and also leave a comfortable distance with the ground levels.
These kits come in the form of good hardware which possesses numerous springs.
BENEFITS OF LEVELING KIT
Maintains Factory- quality Rides
Most levelers are structured in such a manner as to be able to maintain factory-quality rides. They do this by enabling you to make some changes on the wheels, shock absorbers, and the springs. You may, therefore, be certain to keep off any bumps or unpleasant shakings.
Increases Ground Clearance
As stated, these gadgets play a vital role in increasing ground clearance. This is basically the distance between the ground level and the area beneath the vehicle. Such a clearance allows you to easily repair the wheels and other issues the vehicle might confront in such areas.
Levels the Vehicles
They also level the vehicles. This simply means that they keep all the tires aligned in a straight line. In light of this, the vehicle becomes easier to work and repair. It also becomes less fidgety and comparatively stable to handle.
Eliminates the Need for the Vehicle Rake
With the leveling kits, you do not have to possess a vehicle rake at all. You will subsequently enjoy the pleasure of raising the entire vehicle with a uniform height as opposed to only one side at a time. You will also use comparatively less muscle power to do the job on the whole.
Dampens Vibrations Effectively
Lastly, these levers also dampen vibrations. They are subsequently safer to engage when compared to other equipment of their kinds. They are hardly capable of endangering your life and also makes the working environment pretty safe and reliable at all times.
HOW TO INSTALL LEVELING KIT
Follow the instructions below to install your leveling kit and make it ready for use:
Use a jack to raise the front portion of the vehicle. Make use of the support stands in order to keep the front wheels off the ground.
Now remove the front tires or wheels. Do this by making use of the 21 mm deep well socket. The aim of such a removal is to be able to work on the wheel slot or socket.
Loosen the upper strut bolts using an 18 mm wrench.
Place the jack stand beneath the knuckle for the sake of support. Proceed to unlock the upper ball joint nuts. Yet again, use the 18 mm wrench to do the job.
Hit the knuckle using a hammer to enable the ball joint to be separated from the knuckle.
WHAT SHOULD I LOOK WHEN CHOOSING A LEVELING KITS?
Leveling kits come in various shapes and forms. You have to be sure to find one that specifically meets your unique needs. The failure to match the leveling kit with the right task will often lead to inconveniences while working out the mechanic tasks.
The weight of the Car
Needless to say, these kits have their own specific weight tolerance limits. When subjected to intense weights, they may often break apart or sustain permanent damages. It is for this reason that you also want to take care of the weight capacities of the leveling kits as you look for the right one.
How much space do you want to be created underneath the car? This consideration is necessary as these leveling kits are limited insofar as the amount of clearance they can bring about is concerned. It, therefore, goes without saying that you ought to find one that is capable of creating the needed clearance.
You will inevitably have to key in some muscle power as you engage these leveling kits. This notwithstanding, you do not have to strain too much. You definitely want one that is not so cumbersome to engage and requires comparatively less muscle power.
Experience and Expertise
Lastly, you also have to be sensitive to the experience and expertise required to engage the leveling kits. You do not want one that is way too complicated for a beginner if you lack any prior experience. You, therefore, want to strike a balance between your expertise and the nature of these leveling kits.
TRUCK LEVELING KITS vs LIFT KITS
This video might help you.
FREQUENTLY ASKED QUESTIONS (FAQs)
Q1. Is a leveling kit the same as a lift kit?
NOT really! They play the same roles and impact almost the same components of the vehicles. However, the lift kit is larger both in scope and dimensions.
Q2. What does leveling a vehicle really mean?
Leveling means keeping the truck in a straight and perfectly-aligned position. This is to allow you to work under the car easily and without any unnecessary hassles of whichever nature.
Q3. What is the difference between a suspension and the body lift?
The suspension lift alters the suspension parameters such as the springs and the shock absorbers. The body lift, on the other hand, leaves the entire vehicle intact but nevertheless lifts it from the ground.
Q4. Does a suspension kit affect the ride quality?
Partly yes! The kit impacts the stability of the truck. This has the attendant consequence of interfering with its center of gravity and reliability while on the road.
MY FAVORITE IS the Maxracing 2″ Front End Leveling Kit. It is comprehensive in compatibility and hence great for a career mechanic like me.
In your search for the right leveler, this is the one to consider giving a top-priority. You will definitely enjoy maximum convenience and reduced operational expenses.
- BEST LEVELING KITS FOR SILVERADO
- #1: MotoFab Lifts CH-3F-2R 3″
- #2: MotoFab Lifts CH-2.5-2.5″ Front Leveling Lift Kit
- #3: Rough Country (1307) 2″ Front End Leveling Kit
- #4: YITAMOTOR Leveling Kit 2″ Lift Kit
- #5: Supreme Suspensions -- 2007-2018 Silverado
- #6: Rough Country -- 28330
- #7: Maxracing 2″ Front End Leveling Kit
- #8: MotoFab Lifts 99CHTK 1-3″ Leveling lift kit
- #9: 3″ Front Leveling Lift Kits for Chevrolet Silverado
- #10: MotoFab Lifts CH-2LM -- 2″ Front Leveling Lift Kit
- #11: MotoFab Lifts CH-1R 1″ Rear Leveling lift kit
- WHAT IS A TRUCK LEVELING KITS?
- BENEFITS OF LEVELING KIT
- HOW TO INSTALL LEVELING KIT
- WHAT SHOULD I LOOK WHEN CHOOSING A LEVELING KITS?
- TRUCK LEVELING KITS vs LIFT KITS
- FREQUENTLY ASKED QUESTIONS (FAQs)