How To Fold Coleman Instant Tent? (Helpful Tips)
You might be surprised to learn that you can actually fold your Coleman instant tent quite easily. Here’s how:
1. First, remove any stakes or guy lines that are attached to the tent.
2. Next, fold the tent in half lengthwise.
3. Then, fold the tent in half again widthwise.
4. Finally, roll up the tent starting from one end and secure it with the included straps.
How do you collapse a pop up canopy?
There’s no need to be anxious about collapsing your pop up canopy. It’s actually quite simple! Just follow these easy steps and you’ll have it done in no time.
1. Start by removing any loose items from the canopy, such as decorations or lights.
2. Fold the canopy fabric into quarters, starting at one of the corners.
3. Hold onto the center pole, and then push down on each of the legs until they’re all fully extended.
4. Once all the legs are extended, start folding them up towards the center pole.
5. Keep folding until all the legs are completely folded in and the canopy is compacted into a small circle or oval shape.
How do you put an instant tent away?
When you’re ready to put your instant tent away, there are a few things you need to do. First, take all the poles out of the tent and lay them flat on the ground. Then, fold up the tent body and set it aside. Next, fold up the rainfly and set it on top of the tent body.
How do you fold a Coleman Instant dome tent?
When you’re ready to pack up your Coleman Instant Dome Tent, follow these simple steps to fold it down quickly and easily. First, take all of the poles out of the tent. Next, fold the tent in half length-wise. Then, fold it in half again width-wise. Finally, roll the tent up tightly from one end to the other.
How do you fold a Coleman pop up tent?
If you’re looking to fold up your Coleman pop up tent, here’s a quick and easy guide. Start by taking the tent down and removing all of the poles. Once everything is disassembled, start folding the tent in half lengthwise.
Then, fold it in half again widthwise. Once you have a smaller square, begin folding it into a triangle shape. After that, simply roll it up tightly and secure with the straps that came with the tent. And that’s it! Now you know how to fold up your Coleman pop up tent like a pro.
How do you put down an instant tent?
To put down an instant tent, first find a level spot on ground that is clear of any debris. Then, unpack your tent and lay it out flat. Next, extend the legs of the tent and push them into the ground until they are secure. Finally, pull the canopy of the tent over the frame and tie it down at the corners.
How do you put an instant tent down?
There’s nothing worse than being out in the middle of nowhere and realizing you don’t know how to put your tent down. Luckily, it’s not as difficult as it may seem. With a little practice, you’ll be able to put your instant tent down in no time at all.
Here’s what you need to do:
1. Find a level spot – This is important because if your tent is not level, it will be uncomfortable to sleep in and could even collapse on top of you. Once you’ve found a good spot, clear away any rocks or sticks that might be in the way.
2. Unfold the tent – Most instant tents come with an easy-to-follow diagram that shows you how to do this step. If yours doesn’t have one, just take a look at the instructions that came with the tent or look online for a video tutorial.
How do I pack my Coleman Instant up tent?
Packing up your Coleman Instant tent is easy! Here’s what you need to do:
1. Take down the tent poles and fold them in half.
2. Place the folded poles in the carrying bag that came with your tent.
3. Fold the tent body in half, then roll it up tightly.
4. Place the rolled-up tent body in the carrying bag on top of the poles.
How do you fold up a Coleman Instant dome tent?
There’s no need to be intimidated by a Coleman Instant dome tent – they’re easy to set up and take down, and only require a few simple steps to fold up. Here’s how:
1. Start by taking the tent down from where it’s pitched. Take all of the poles out of the sleeves, and lay them out in a straight line on the ground.
2. Once the poles are removed, start folding up the tent body itself. Begin at one end, and fold it inwards towards the center until you have a long, narrow strip.
3. Continue folding this strip until it forms a small square or rectangle. At this point, you can tuck it away into its carrying bag for storage.
4. The final step is to pack up the poles themselves.

How do you fold up a Coleman 8 Person Instant Tent?
Setting up a Coleman 8 Person Instant Tent is quick and easy – but taking it down and packing it away can be a bit more challenging. Here’s a step-by-step guide to folding up your tent:
1. Start by taking down the rainfly – this is the waterproof layer that goes over the top of the tent. Be careful not to rip or damage it as you remove it.
2. Once the rainfly is off, fold it in half lengthwise. Then, roll it up tightly from one end to the other.
3. Next, take down the poles that support the tent. These will likely be attached at each corner of the tent, so start by detaching them at one corner and then working your way around.
4. Once all four poles are detached, fold them in half and tuck them into one of the carry bags that came with your tent (one bag should be for the poles and one for the tent itself).
How do you fold a Coleman 4 person Instant Tent?
You can easily fold a Coleman 4 person Instant Tent by following these simple steps. First, take the tent out of the carrying bag and lay it flat on the ground. Then, locate the two metal poles that run along the sides of the tent. These are the main support poles for the tent.
Next, grab hold of one of these poles near the middle and begin to fold it in half until it is about four feet long. Then, do the same with the other pole. Once both poles are folded in half, you can then begin to fold up the tent itself. Start by folding one side of the fabric over towards the center, and then do likewise with the other side.
After both sides are folded in towards the center, continue to roll up all four sides until they are completely rolled up into a tight bundle.
How do you put a pop up tent back in a bag?
If you’re like most people, you probably had a lot of fun using your pop up tent at your last camping trip. But now that it’s time to pack up and head home, you’re wondering how on earth you’re going to fit that tent back into its tiny bag.
Here’s the good news: it’s actually not that difficult! With a little bit of patience and some careful folding, you can get your pop up tent back into its storage bag in no time. Here’s how:
1. Start by taking the poles out of the loops that hold them in place. This will make the tent much easier to fold.
2. Next, fold the sides of the tent inward so that they meet in the middle.
3. Once both sides are folded in, fold the top half of the tent down towards the ground.
4. Finally, roll up the entire tent from one end to the other until it resembles a long sausage-shaped tube.
How do you fold up a Coleman 4 person tent?
If you’re looking to fold up your Coleman 4 person tent, there are a few things you’ll need to keep in mind. First, make sure that all of the poles are detached from the tent. Once they’re detached, start folding the tent in half length-wise.
Once it’s folded in half, start rolling it up tightly until it’s in a compact cylinder shape. To secure the rolled-up tent, use either the Velcro straps that come with most tents or some rope. And that’s it! With a little practice, you’ll be able to fold up your Coleman 4 person tent in no time at all.
How do you pack a Coleman Instant Tent?
Packing up a Coleman Instant Tent is quick and easy! Just follow these simple steps:
1. First, make sure that all of the tent poles are detached from the tent. If they’re not, detach them now.
2. Next, fold the tent body in half lengthwise. Then, fold it in half again widthwise.
3. Once the tent body is folded in quarters, roll it up tightly until it forms a long cylinder shape.
4. To pack away the tent poles, first extend each pole fully. Then, twist or bend each pole in half until it forms a small loop at one end.
Finally, tie all of the loops together with a piece of string or cordage to keep them securely bundled together.
- Weatherproof: Welded corners and inverted seams keep water from getting in
- Enhanced ventilation: Integrated rainfly offers extra weather protection with better airflow